EnGenius EOC-2610 User Manual page 2

Wireless
- 2.4GHz It works in 2.4GHz frequency spectrum
- High output power Transmit output power programmable for different country selections
- High Data Rate High speed transmitting rate up to 108Mbps with Super G, support large payload such as MEPG
video streaming
- Multifunction application Access Point/Client Bridge/Client Router
- Long range transmitting Transmit power control and distance control (ACK timeout)
- Signal Strength LED indicators have the best transmit and receive signal for traffic communication
Networking
- Public wireless solution An AP interface that is especially useful in public areas such as hotspots and enterprise
- Signal Strength Display RF signal strength status shown LEDs of 3 colors, making network build-up easier
- QoS(WMM) Enhance performance and density
Security
- 802.11i WEP, WPA, WPA2 (Encryption support TKIP/AES)
- MAC address functions MAC address filter (AP mode)
- 802.1x IEEE802.1x Authencatior
- L2 isolation
- Station isolation
Management
- Firmware Upgrade Upgrading firmware via web browser, setting are reserved after upgrade
- Reset & Backup Reset to factory default. User can export all setting into a file via WEB
- MIB MIB I, MIB II(RFC1213)
SNMP V1, V2c
-
* Theoretical wireless signal rate based on IEEE standard of 802.11a, b, g chipset used. Actual throughput may vary. Network conditions and
environmental factors lower actual throughput rate.
** All specifications are subject to change without notice.
Jia Ying Trading Pte Ltd
1 Rochor Canal Road #02-67/ 69/ 34-37 Sim Lim Square Singapore 188504
Tel:(+65) 6336 0404 Fax:(+65) 6338 0404
Website: www.jiaying.com Email: jiaying@singnet.com.sg / email@jiaying.com.sg
EOC-2610
Long Range Wireless
Access Point / Client Bridge
2.4GHz
108 Mbps
802.11b/g/Super G
Multi-function AP
Features
20080930_V1.0