Load Fail-Safe Defaults; Load Optimized Defaults - Protech Systems PPC-7400 Operation Manual

4-11. LOAD FAIL-SAFE DEFAULTS

By pressing the <ENTER> key on this item, you get a confirmation dialog
box with a message similar to the following:
Load Fail-Safe Defaults ( Y/N ) ? N
To use the BIOS default values, change the prompt to "Y" and press the
<Enter > key. CMOS is loaded automatically when you power up the
system.
Please be aware that if select the wrong panel type, it may cause the abnormal
display of the LCD.

4-12. LOAD OPTIMIZED DEFAULTS

When you press <Enter> on this category, you get a confirmation dialog
box with a message similar to the following:
Load Optimized Defaults ( Y/N ) ? N
Pressing "Y" loads the default values that are factory setting for optimal
performance system operations.
Please be aware that if select the wrong panel type, it may cause the abnormal
display of the LCD.
'
PPC-740X USER S MANUAL
Chapter 4 Award BIOS Setup
Page: 4-25