Electrical Requirements; Plumbing Requirements; Recommended Tools - ION 901 Owner's Manual

r
equirements

Electrical Requirements

■ 120 VAC electrical supply on 10 amp circuit (US customers).
■ Follow all building codes, using GFI outlets where required.

Plumbing Requirements

■ DO NOT connect copper tubing directly to ION. Copper tubing may
be required by building code or regulation. Contact Natural Choice
Technical Support for specific instructions and recommendations for
adaptor fittings.
■ ¼ inch T-fitting to fit the pipes under the sink.

Recommended Tools

■ Some plumbing tools and/or teflon tape may be required to make the
connection under the sink at the water supply.
■ In the event service is required on the ION, locate the Torx 20 wrench
under the Faucet Cover to remove panel screws.
NOTE: The pipe wrench and teflon tape may vary with the water supply
connection.
Torx 20 wrench
(included and located
under the faucet cover)
CO
(for Models 903 and
904 only, included
with the CO
8
Adjustable crescent
wrench
2
regulator)
2
wrench
Teflon tape
www.naturalchoicewater.com