Local On/Off - Rodgers Trillium T787 Owner's Manual

To turn Multitrack Mode On or Off:
1. Press and release the QUICKMENU piston.
2. Rotate the Select knob to highlight MIDI Settings.
3. Press QUICKMENU to select the MIDI Settings category.
4. Rotate the Select knob to highlight Multitrack.
5. Press QUICKMENU to select Multitrack Mode. The following screen is
displayed:
6. Rotate the Alpha dial to select the desired setting (On or Off).
7. Press General Cancel ('0') to exit.
!
The organ returns to Multitrack Mode Off when it is powered down.

Local On/Off

The Local On/Off control provides opportunities for some very unique MIDI setups, many of
which will not be used by most organists. However, should the need arise, the control is
available.
When the T787 is in the Local On condition, the instrument operates normally. This is the
default setting.
When the T787 is in the Local Off condition, the stops, keyboards and pedalboard of the
organ are disconnected from the internal ("Local") sounds of the instrument, so that
activating stops and playing notes won't result in any sound being heard.
However, the instrument still transmits MIDI information which can be recorded or used to
control a separate Rodgers organ. This feature can be used to silence the Master console
completely when one Rodgers organ is use to control another Rodgers console.
Also, in the Local Off condition, "Local" organ voices can still be played by a sequencer or
remote keyboard connected to the T787 MIDI IN jack; this means that the sounds of the
T787 can be controlled by a remote source even when "Local Off" is selected.
M I D I S e t t i n g s
M u l t i t r a c k O F F
M a s t e r C h a n n e l
P D S e n d / R e c v
69