Table of Contents
Advertisement
user manual
Flashline
3. The Flashline System
The Flashline TFS-900 System is a complete, fully integrated, large scale, five-way two-box line array sound
reinforcement system. It comprises mid/high and sub-bass loudspeakers, amplification and system control racks,
flying hardware, and transport cases in a very powerful and space-efficient format.
The Flashline system is designed to allow integration of systems around the world with guaranteed 'out of the box'
compatibility.
3.1 TFS-900H mid/high loudspeaker
The TFS-900H is a four-way line array module covering the frequency range above 70Hz and containing three 1"
high frequency compression drivers loaded by Dendritic waveguides, two 6.5" high-mid cone transducers loaded by
Polyhorns, four 6.5" horn-loaded low-mid cone transducers, and two 12" horn-loaded low frequency transducers.
The rigging hardware is integrated into the end-cheeks on each side of the TFS-900H cabinet, which also provide
grab handle positions. Drop links at the front and rear of the box engage in the flygear of the box below it in the
array to give a range of inter-cabinet angles from 0° to 5°. TFS-900H cabinets are normally transported four-up
on the TFS-DOLLY and can be flown right off the dolly in blocks of four, with the rigging hardware already pre-
configured for use. A simple TFS-GRID and TFS-TIP system is used to fly a typical array; no additional external parts
are required to fly the system.
The cabinet is finished in black TourTough finish.
TFS-900H Butterfly plate
TFS-900H Horn
TFS-900H Endcheek
TFS-900H Flying pins
TFS-900H Handle
TFS-900H Flying pins
TFS-900H Grilles
TFS-900H Rear Drop link
TFS-900H Front Drop link
Flashline User Manual
page 8
Hide quick links:
Advertisement
Table of Contents
