Important Safety Instructions (Amplifiers); Safety Instructions For 20000Dp; Standards - Lab.gruppen TFS-900 User Manual

user manual
Flashline

1. Important Safety Instructions (Amplifiers)

Before using the device, be sure to carefully read the Safety Instructions. Keep this document with the
device at all times.

1.1 Safety Instructions for 20000DP

• R ead these instructions.
• K eep these instructions.
• H eed all warnings.
• F ollow all instructions.
• D o not use this apparatus near water.
• C lean only with a dry cloth.
• D o not block any ventilation openings. Install in accordance
with the manufacturer's instructions.
• D o not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that
produce heat.
• D o not defeat the safety purpose of the polarized or grounding-
type plug. A polarized plug has two blades with one wider than
the other. A grounding-type plug has two blades and a third
grounding prong. The wide blade or the third prong is provided
for your safety. If the provided plug does not fit into your outlet,
consult an electrician for replacement of the obsolete outlet.
• Protect the power cord from being walked on or pinched,
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
• Only use attachments/accessories specified by the
manufacturer.
• Unplug this apparatus during lightning storms or when unused
for long periods of time.
• Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not operate
normally, or has been dropped.
• Use the mains plug to disconnect the apparatus from the mains.
• WARNING: To reduce the risk of fire of electric shock, do not
expose this apparatus to rain or moisture.
• Do not expose this equipment to dripping or splashing and
ensure that no objects filled with liquids, such as vases, are
placed on the equipment.
• The mains plug of the power supply cord shall remain readily
operable.
• Do not connect the unit's output to any other voltage source,
such as battery, mains source, or power supply, regardless of
whether the unit is turned on or off.
Flashline User Manual
page 4
• Do not remove the top (or bottom) cover. Removal of the cover
will expose hazardous voltages. There are no user serviceable
parts inside and removal may void the warranty.
• An experienced user shall always supervise this professional
audio equipment, especially if inexperienced adults or minors
are using the equipment.
• The US National Differences clause 16.3 requires that network
cables must be flame rated VW-1.
• To prevent electric shock do not remove top or bottom covers.
No user serviceable parts inside, refer servicing to
qualified service personnel.
• à prévenir le choc électrique n'enlevez pas les couvercles.
Il n'y a pas des parties serviceable à l'intérieur, tous
reparations doit etre faire par personnel qualifié
seulment.
• To completely disconnect this equipment from the AC mains,
disconnect the power supply cord plug from the AC
receptacle. The mains plug of the power supply cord
shall remain readily operable.
• Pour démonter complètement l'équipement de l'alimentation
générale, démonter le câble d'alimentation de son
réceptacle. La prise d'alimentation restera aisément
fonctionnelle.

1.2 Standards

This equipment conforms to the
requirements of the EMC Directive 2004/108/
EC and the requirements of the Low Voltage
Directive 2006/95/EC. Standards applied:
EMC Emission, EN55103-1, E3, EMC Immunity EN55103-
2, E3, with S/N below 1% at normal operation level.
Electrical Safety EN60065, Class I
This equipment is tested and listed according
to the U.S. safety standard ANSI/ UL 60065
and Canadian safety standard CSA C22.2 NO.
60065. Intertek made the tests and they are a Nationally
Recognized Testing Laboratory (NRTL).