System Requirements - Targus Wireless Remote Presenter User Manual

System Requirements

To use the presenter, your computer must meet the following
hardware requirements and run one of the operating systems
listed below.
Hardware
• PC with an Intel
processor or equivalent and a hard
disk drive
• 64 MB RAM or higher, depending
on the operating system
• USB interface
Connecting the Receiver and
Installing the Default Driver
To connect the receiver to your computer, plug the standard
USB end of the receiver into an available USB port on your
computer. Alternatively, you can use the supplied USB
extension cable to connect the receiver to your computer for
additional length.
Your computer's operating system identifies the receiver as a
"USB Human Interface Device" and begins installing the
default driver. Follow any on-screen procedures to complete
the default driver installation.
NOTE: If you are running the Windows
system, you may be prompted to insert the installation
CD-ROM that came with your computer.
You are now ready to begin using the presenter.
Targus Wireless Remote Presenter
® Pentium ®
Operating System
• Windows
• Windows
Edition
• Windows
• Windows
® 98/Me operating
4
®
98
®
Millennium
®
2000
®
XP