Table of Contents
Advertisement
Main MENU – Auto Record
Use direction buttons to select Auto Record.
Press the Enter button to choose On or Off.
If switched to OFF then Auto Record is
disabled.
Main MENU – Overwrite HDD
Use direction buttons to select Overwrite
Enable. Press the Enter button to choose
Yes or No.
When Auto Record is set to On, the EZVR8
will start recording again after 2 minutes of
inactivity after being manually stopped.
YES – Recording continues to overwrite the
oldest information after the Hard Disk is full
NO - Recording stops when the Hard
Disk is full
14
Advertisement
Table of Contents
