Attaching And Using The Supplied Cables - Nokia 5510 Owner's Manual

The headset lead functions as the
antenna of the radio, so let it hang
freely.
Warning! Listening to
music at a high volume may
damage your hearing. To
adjust the volume level in
the headset, press the
Volume up or Volume down
key on the side of the
phone.
To use the headset to receive and
make calls
To answer a call while using the
headset, press the remote control
button which is located in the
microphone part of the headset. To
end the call, again press the same
button.
If you have saved voice tags to
certain phone numbers in your
phone book, you can also make
calls using the headset. Press and
hold the headset key until you
hear a short tone. Say the voice
tag. The phone dials the
corresponding phone number.
To receive calls with a headset
other than HDD-2: On standby
mode, press
divert or reject the call, press
.You can listen to the caller's
voice in your headset, and you will
need to talk into the phone's
microphone. Note that it is always
safest to use the HDD-2 headset.
Copyright © 2004 Nokia. All rights reserved
(Answer). To
Attaching and using
the supplied cables
With the sales package, you
receive three cables that you can
use with your Nokia 5510 phone.
1. To use a compatible audio
headset other than HDD-2,
attach the supplied ADA-2
Audio Adapter Cable (number 1
in the picture below) to the 35
mm headset and insert the
adapter in the phone. Note that
it is safest to use the supplied
headset.
2. You can connect your phone to
an external audio system (for
example, a CD player) by using
the supplied ADE-2 Audio Line
In Cable (number 2 in the
picture).
3. You can use Nokia Audio
Manager to handle your sound
files. To attach the phone to
your PC, use the supplied DKE-
2 Connectivity Cable (number 3
in the picture below).
Getting started
15