Table of Contents
Advertisement
Driver Controls
3. Partially lower tailgate and carefully feed tailgate harness up through
the truck box and the bumper. Secure the tailgate harness onto the
vehicle box.
4. Lower the tailgate.
5. Use a screwdriver to pry the
spring clip (on each connector) past
the head of the support screw.
Disconnect cable.
6. Disconnect the other cable.
7. Lift tailgate to a 45-degree angle
from horizontal.
8. Lift right side off of its hinge.
9. Lift tailgate to a 80-degree angle from horizontal.
10. Remove tailgate from left side hinge by sliding tailgate to the right.
To install, follow the removal procedures in reverse order.
BEDRAILS (IF EQUIPPED)
• This bedrail is for appearance use only.
To help prevent injury, do not use bedrail to retain cargo.
• Retain cargo with the pickup tiedown hooks.
BED EXTENDER (IF EQUIPPED)
Your vehicle may be equipped with a bed extender designed to extend
the pickup box for larger loads.
To extend the bed extender:
1. Lower tailgate.
2. Pull the lever on each side of the
bed extender to release it from the
pickup box.
3. Lift the bed extender over onto
the tailgate.
112
2008 Mark LT (mlt)
Owners Guide (post-2002-fmt)
USA (fus)
Advertisement
Table of Contents
