Installing Keystudio; Setup; Windows Xp And Windows Vista Installation Instructions - M-Audio KeyStudio User Manual

Setup

Your KeyStudio keyboard functions as a class-compliant device and will be recognized by your computer without the need to install
additional drivers Simply use the included USB cable to connect the keyboard to an available USB port on your computer and set
the power switch to the On position
Windows users, who are planning to:
• use the keyboard with more than one application at the same time
or
• simultaneously use other class-compliant USB devices with audio capabilities
...must install the latest KeyStudio driver found on the M-Audio website www.m-audio.com.

Windows XP and Windows Vista Installation Instructions

NOTE: Make sure your KeyStudio keyboard is not connected to the computer when beginning the installation. The following
instructions will indicate when you should connect it to your computer.
1. Download the latest KeyStudio driver from the Support > Drivers page at www.m-audio.com. Once you have saved the
installer to your computer, double-click the file to start the installation process
2 Follow the driver installer's on-screen instructions At various points in this installation process, you may be notified
that the driver being installed has not passed Windows Logo Testing, or asked whether the program you wish to run is
a trusted application Click "Continue Anyway"
installation
3 Once the installer has completed, click "Finish "
4. Connect your KeyStudio keyboard to an available USB port on your computer. If you are using Windows Vista, your
KeyStudio keyboard is now ready to use If you are using Windows XP, proceed with steps 5-8
KeyStudio User Guide
(Windows XP) or "Install"
1
1

Installing KeyStudio

(Windows Vista) to proceed with the
2
|
5
6
2