Chapter 6 Using The Operator Panel; Resetting To Factory Defaults; Understanding The Operator Panel Lights - Epson AcuLaser M1400 Series User Manual

Chapter 6
Using the Operator Panel

Resetting to Factory Defaults

After executing Initialize NVM and rebooting the printer, all the menu parameters or data are reset to
their factory default values.
1. Turn off the printer.
2. Open the rear cover.
3. While holding down the button on the operator panel, turn on the printer.
Ensure that the
printer, and then execute step 3 again.
4. Close the rear cover.
The printer starts initializing the Non-Volatile Memory (NVM).
Important:
Never attempt to turn off the printer. The printer will cease to function.
The printer restarts automatically to apply the settings.

Understanding the Operator Panel Lights

The operator panel lights mean different things, depending on their sequence. Umber and green lights
that are off, on, or blinking indicate printer conditions.
LED
1 Error
(Ready) LED and (Error) LED blink. If the LEDs do not blink, turn off the
Off
—
Epson AcuLaser M1400 Series
On Fast Blink
User's Guide
Slow Blink
Using the Operator Panel 54