Epson EB-X14H User Manual page 59

List of Functions
Submenu
Progressive (This setting can only be adjusted when a component video or
RGB video with an interlaced signal (480i/576i/1080i) is input.
This cannot be set when a digital RGB signal is input.)
g
Interlace
conversion)
• For EB-X15
Off: Ideal for images with a large amount of movement.
Video: Ideal for general video images.
Film/Auto: This is ideal for movie films, computer
graphics, and animation.
• For EB-X14H/EB-X11H/EB-S11H
On: Ideal for still images.
Off: Ideal for images with a large amount of movement.
(This cannot be set when a digital RGB signal is input, when
Noise Reduction
projecting an interlaced signal while Progressive is set to Off, or
(EB-X15 only)
when a 480p, 576p, or 1080p signal is input while Image
Processing is set to Fast.)
Smoothes out rough images. There are two modes. Select your
favorite setting. It is recommended that this is set to Off when
viewing image sources in which noise is very low, such as for
DVDs.
HDMI Video When the projector's HDMI port is connected to a DVD player,
Range the projector's video range is set according to the DVD player's
(EB-X15 only) video range setting.
You can select input signal from Computer port.
Input Signal
If set to Auto, the input signal is set automatically according to
the connected equipment.
If colors do not appear correctly when set to Auto, select the
appropriate signal according to the connected equipment.
Video Signal You can select the input signal from the Video port. If this is set to
Auto, video signals are recognized automatically. If interference
appears in the image or a problem occurs such as no image is
being projected when set to Auto, select the appropriate signal
depending on the connected equipment.
Function
g
(i) signal is converted to Progressive
Submenu
Aspect
Overscan
(p). (IP
Image Process‐
ing
(EB-X15 only)
Reset
Function
g
You can set the aspect ratio for projected images.
s "Changing the Aspect Ratio of the Projected Image "
Changes the output image ratio (the range of the projected
image). You can set the cropping range to Off, 4%, or 8%. When
the source is HDMI, Auto is available (EB-X15 only). When
Auto is selected, it automatically changes to Off or 8% according
to the input signal.
Changes settings for image processing.
Fast: Images are displayed quicker. The pen's reaction time is
improved when using the optional interactive unit.
Fine: Images are displayed in higher quality.
You can reset all adjustment values on the Signal menu to their
default settings, except for Input Signal.
See the following to return all menu items to their default
settings.
s "Reset Menu" p.63
59
p.39