Table of Contents
Advertisement
Adjusting Projected Images
d
Using the [
], [
], [ ], and [ ] buttons on the remote control,
or the [
], [
], [
], and [
w
v
a
on the control panel, select the corner to correct, and then press
the [
] button.
e
Using the [
], [
], [ ], and [ ] buttons on the remote control,
or the [
], [
], [
], and [
w
v
a
on the control panel, correct the position of the corner.
When you press the [
displayed.
If the message "Cannot adjust any further." is displayed while
adjusting, you cannot adjust the shape any further in the direction
indicated by the gray triangle.
] buttons (or the [Wide]/[Tele] buttons)
b
] buttons (or the [Wide]/[Tele] buttons)
b
] button, the screen shown in step 4 is
f
Repeat procedures 4 and 5 as needed to adjust any remaining
corners.
g
When you are done, press the [Esc] button to exit the correction
menu.
Because Keystone was changed to Quick Corner, the corner
selection screen shown in step 4 is displayed the next time you press
the [
] or [
] buttons on the control panel. Change Keystone to
w
v
H/V-Keystone if you want to perform horizontal and vertical
correction using the [
] or [
w
Settings - Keystone - H/V-Keystone
s
] buttons on the control panel.
v
p.60
35
- Quick Links:
- Connecting with a Usb Cable and...
Hide quick links:
Advertisement
Table of Contents
