Dell OptiPlex 745 DESKTOP Tech Specs page 5

Dell™ OptiPlex™ 745
Tech Specs
ENCLOSURE & VENTILATION REQUIREMENTS
Enclosure Ventilation
Enclosure Minimum Clearance
Recommended Enclosure
Open Desk Minimum Clearance
STANDARDS
BIOS Factory Defaults (All Chassis)
BIOS address F0000h
BIOS chip (NVRAM) 8Mb
Setup Option Default Factory Value
Parallel Port mode PS/2
Parallel Port address 378
Wake on LAN Off
EIST Off
Onboard Audio On
Onboard Modem On
Flex bay On (no boot)
Execute Disable On
Onboard NIC On (without PXE)
PS2 Mouse On
Onboard USB On
MINITOWER
If your enclosure has doors, they need to be of a type that allows at
least 30% airflow through the enclosure (front and back).
Leave a 10.2 cm (4 in.) minimum clearance on all vented sides of the
computer to permit the airflow required for proper ventilation.
Do not install your computer in an enclosure that does not allow airflow.
This restricts the airflow and impacts your computer's performance,
possibly causing it to overheat.
If your computer is installed in a corner, on a desk, or under a desk,
leave at least 5.1 cm (2 in.) clearance from the back of the computer
to the wall to permit the airflow required for proper ventilation.
TCO99, Blue Angel, Green PC, Energy Star, BSMI, C-TICK, CE, FCC, IRAM, NEMKO, NFPA99, SABS, SASO, TCO,
TUV, UL, VCCI, USB 2.0, WEEE
USB front panel On
Module bay On
Serial #1 Port Auto
Keyboard Num lock Report
Keyboard error report On
Onboard Video Auto
HD Acoustic mode Bypass
Onboard Video buffer 8MB
Primary Video Add-in
Suspend mode S3
Chassis intrusion On
TPM Off
Smart drive error report Off
A/C recovery Off
SMALL FORM
DESKTOP
FACTOR
Low power mode
Password
POST hot keys
SATA drives
Floppy
Limit CPUID
ASF Settings
HD Password
Hyper-threading
Auto Power on
Auto Power time
SERR
Fast Boot
ULTRA SMALL
FORM FACTOR
Off
Disabled
Setup & Boot Menu
On
Internal
Off
Off
Disabled
On
Off
12:00am
On
On