Introduction
The HMX 4X4K is a 4 by 4 HDMI Matrix switch that converts the HDMI source signals to
CAT5e/6/7. With resolutions up to 1080p Full HD, 1920x1200@60Hz and multichannel digital
audio supplied by up to four High-definition sources to any of the four CAT5e/6/7 outputs.
It supports digital audio formats such as LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus
and DTS-HD. The HMX 4X4K also is compatible with 3D content and can be displayed
on a 3DTV, a 3D Source will be required. The HMX 4X4K allows four HDMI sources to be
independently controlled and distributed to four Sink (TV's) displays up to 100 meters away
along with IR signals and POE to power the Receivers and Ethernet (Internet).
Applications
•
HDMI System controls
•
Video/TV wall display and control
•
Security surveillance and control
•
Commercial Signage advertising, displaying and control
•
Lecture room display and control
•
Superstores, Supermarket Signage and CEC control
•
Residential Markets
Package Contents
•
HMX 4x4K HDMI Matrix Switcher over CAT5e/6/7 x 1
•
IR Emitter x 4
•
24V/6.25A DC adaptor x 1
•
Remote control x 1
•
HRX 1V HDMI Receivers (1 for each zone) x 4
•
User manual
System Requirements
•
Input source equipment with HDMI connection
•
CAT6 250MHz minimum is recommended for future proofing, backward compatible
CAT5e cable
•
Output display or audio receiver equipment with HDMI connection cables
4