Cisco Aironet 1040 Series Getting Started Manual page 17

Table 1 shows the access point Status LED indications for various conditions.
Table 1 LED Status Indications
Message
Type
Boot loader status
sequence
Association status
Operating status
Boot loader warnings
Status
LED
Blinking green
Green
Blue
Blinking blue
Cycling through green,
red, and amber
Rapidly cycling
through blue, green,
and red
Blinking blue
Red
Blinking green
Blinking red
Message
Meaning
DRAM memory test in progress
DRAM memory test OK
Board initialization in progress
Initializing FLASH file system
FLASH memory test OK
Initializing Ethernet
Ethernet OK
Starting Cisco IOS
Initialization successful
Normal operating condition, but no wireless
client associated
Normal operating condition, at least one wireless
client association
Software upgrade in progress
Discovery/join process in progress
Access point location command invoked
Configuration recovery in progress (MODE
button pushed for 2 to 3 seconds)
Ethernet failure or image recovery (MODE
button pushed for 20 to 30 seconds)
Image recovery in progress (MODE button
released)
Ethernet link not operational
17