ezee quando User Manual page 9

Quando Quando
Tools required
you will need a
Allen / Hex key metric set
Philips head screwdriver
Open-end flat wrenches metric
measurements 6mm - 17mm
Seat post
and align. Tighten clamps and ensure seat is firmly fastened.
You could raise the seat a maximum of about 4" or 100 mm from
the lowest position
Tigtening torque
Do not adjust the seat post beyond its maximum extension
6
mark.
The mudguards are made of polycarbonate and should not rattle
when they're securely fastened.
Brakes
the bicycle. To minimise the risk of injury, its vital to ensure they are
corrected adjusted. Ensure that the V-brake blocks are parellel to
the rim, and that the distance between them do not exceed 2mm,
Tools are the first step to proper assembly,
Insert into the seat tube of the bicycle frame
16 Nm
Pedals
Pedals are marked "L" and "R"
for left and right respectively. Screw in clock-
wise for the "R" pedal and counter-clockwise
for "L". Tighten both with a wrench firmly but
not excessively as the crank threads are made
of aluminum alloy.
Front Mudguard
attached to the sides and top of the front fork.
One of the most important safety features on
Assembly
The supports are
9