Monster Power Signature MPA5150 Owner's Manual page 18

STEP 5 AC Power Connections
Monster amplifiers can be run at 115V or 230V. Verify that the voltage switch is in the
correct position for your location. In the US this should be set to 115V.
1. Set the AC power selector switch to the proper voltage.
FUSE 12A SLOW 120V
FUSE 6A SLOW 240V
VOLTAGE SELECTOR
AC IN 120/240V
SWITCHABLE
4. Connect one end of the supplied Monster AC power cord to the MPA 5150.
5. Connect the other end into the wall or Monster Power Center.
To
Monster Power Center
VOLTAGE SELECTOR
S/N
AC 120V/240V
SWITCHABLE
1 14