Monster Power Signature MPA5150 Owner's Manual page 17

STEP 4 Remote Trigger Connections
1. Connect one end of the 1/8"-to-1/8" mono mini cable to the remote output of your receiver/preamp.
Should your receiver not have a remote trigger out, the 12V power transformer
can be plugged into the switched AC outlet on the back of your receiver.
2. Connect the other end of the 1/8"-to-1/8" mono mini cable to the remote trigger in of the MPA 5150.
If you are using the 12V power transformer, connect the end with the 1/8" mono mini jack to the
remote trigger in of the MPA 5150.
3. Connect one end of the 1/8"-to-1/8" mono mini cable to the remote output of the MPA 5150.
Connect the other end to the remote trigger in one of the other devises you wish to control
with the MPA 5150.
From Receiver/ Preamp
Remote Trigger Out
1 13
To
MPA 2250
Trigger In
IN AC/DC 3-30V
REMOTE TURN ON/OFF
OUT DC 12V
UNBALANCED
INPUT 5
(RIGHT REAR)
FUSE 15A SLOW 120V
FUSE 8A SLOW 240V