Monster Power Signature MPA5150 Owner's Manual page 16

STEP 1B For Balanced XLR type connections.
1. Connect one end of the balanced XLR type interconnects to the preamp outputs of the receiver/preamp you
wish to use.
2. Connect the other end of the balanced interconnects to the appropriate channel inputs on the MPA 5150.
From
Balanced (XLR)
Right Rear
Channel Output
IN AC/DC 3-30V
REMOTE TURN ON/OFF
UNBALANCED
OUT DC 12V
INPUT 5
(RIGHT REAR)
3. Set all Input Type Switches towards the Balanced Input.
From
Balanced (XLR)
Right Channel
Output
BALANCED UNBALANCED BALANCED
INPUT 5 INPUT 2 INPUT 2
(RIGHT REAR) (RIGHT) (RIGHT)
UNBALANCED
INPUT 2
(RIGHT)
From
Balanced (XLR)
Center Channel
Output
UNBALANCED BALANCED UNBALANCED
INPUT 3 INPUT 3 INPUT 1
(CENTER) (CENTER) (LEFT)
BALANCED
INPUT 2
(RIGHT)
From From
Balanced (XLR) Balanced (XLR)
Left Channel Left Rear
Output Channel Output
BALANCED UNBALANCED
INPUT 1 INPUT 4
(LEFT) (LEFT REAR)
BALANCED
INPUT 4
(LEFT REAR)
12