Bounty Hunter Quick Draw II Owner's Manual page 12

MODES OF OPERATION
the metallic spectrum, but still detect
items to the left of the scale, as
follows:
SELECTIVELY "NOTCH OUT" THESE
NOTCH is most useful to "notch out"
specific unwanted items. If you
encounter certain bothersome trash
items, program their rejection into
your detector as follows:
1) Turn the Disc/Notch knob 100%
counterclockwise.
2) Pass the undesirable object under
the search coil.
3) Turn the Disc/Notch knob slowly
clockwise until the object is no
longer detected.
Use the NOTCH mode for coin-shooting,
jewelry hunting, or for your own
customized hunt.
12
AUTO NOTCH MODE
P R E S S F O R
AUTO NOTCH TOUCHPAD
To enter the AUTO NOTCH mode,
press the Auto Notch touch pad. In
AUTO NOTCH mode, iron, most pull
tabs, and screw
automatically eliminated.
In addition, you can turn the Disc/Notch
control to selectively eliminate more
items beyond the pre-programmed
ones. The Disc/Notch control operates
in this mode in the same manner as
outlined in the
instructions, except that AUTO NOTCH
does not eliminate the more valuable
nickels.
Use AUTO NOTCH for press-and-go
treasure hunting in applications like
coin-shooting, and jewelry hunting.
T A R G E T M O D
caps are
NOTCH mode