Manually Installing The Driver After Os Installation - Lenovo TS130 Configuration Manual

CONfIgURINg RAID 100 ON TS130
6. Navigate to where the driver is located (device and folder). The correct driver
should be highlighted. If not, select the "Intel Desktop/Workstation/Server
Express Chipset RAID Controller" driver and select Next.
7. At this point, Windows installation will continue. The remaining steps are the
standard steps to complete the OS installation.
To learn more go to www.lenovo.com/thinkserver

mAnuALLy inStALLing the Driver After oS inStALLAtion

Perform the following steps to install the device driver after the OS has been installed,
or to upgrade a driver to a newer version. The driver installation automatically adds the
driver to the registry and copies the driver to the appropriate directory.
1. To install the driver manually, launch the "Device Manager" in the Operating System.
2. Locate the "Intel Desktop/Workstation/Server Express Chipset SATA RAID
Controller" device within "Storage Controllers." Right click to access the context
menu and select "Update Device Software" from the menu.
9