How To Set The Sleep Timer; Explanation Of The Sleep Timer - Hitachi RAS-S10CX Instruction Manual

HOW TO SET THE SLEEP TIMER

Press the

Explanation of the sleep timer

The device will control the FAN SPEED and room temperature automatically
so as to be quiet and good for people's health.
You can set the sleep timer to turn off after 1, 2, 3 or 7 hours. The FAN
SPEED and room temperature will be controlled as shown below.
Operation with the sleep timer
Function
Cooling
" "
and
dehumidifying
" "
(SLEEP) button, and the display changes as shown below.
Mode
Sleep timer
Sleep Timer: The device will continue working for the designated
number of hours and then turn off.
SLEEP
Point the signal window of the remote controller toward the indoor
unit, and press the SLEEP button.
The timer information will be displayed on the remote controller.
The TIMER lamp lights with a beep from the indoor unit.
The room temperature will be
controlled 2°C above the setting
temperature and the FAN
SPEED will be set to LOW
setting 1 hour after the setting
of the sleep timer.
1 hour
4 4
Operation
Sleep
timer set
1 hour later
– 11 –
Indication
2 hours 3 hours
4 4
Sleep timer off
1
7 hours later
2 hours
later
3 hours later
7 hours