Table of Contents
Advertisement
Laney
21
22
Power inlet socket. Connect to your power source. Make sure the specified voltage is correct for your country!
21
This drawer contains the main safety fuse for the unit.
22
USE ONLY THE CORRECT SIZE AND RATING OF FUSE AS SPECIFIED ON THE PANEL
The mains fuse ratings are detailed in the specs section at the rear of this manual
23
Displays the model number, power requirements and serial number of the unit.
Connect an extension loudspeaker cabinet here, the internal loudspeaker is left connected. The impedance of the extension
24
cabinet must not be less than 8 Ohms. Connecting cabinets that have a lower impedance than 8 Ohms will result in the
amplifier overheating. Continual use in this manner may cause permanent damage.
25
Line level FX Loop to connect to an external effects controller.
23
24
OPERATING INSTRUCTIONS
25
Page 8 /12
Hide quick links:
Advertisement
Table of Contents
