Sample System - Laney LX120Twin User Manual

Laney

SAMPLE SYSTEM

General Notes
Amplifier connection: In order to avoid damage, it is advisable to establish and follow a pattern for turning on and off your
equipment. With all system parts connected, turn on source equipment, tape decks, cd players, mixers, effects processors etc. BEFORE
turning on your guitar amplifier. Many products have large transient surges at turn on and off which can cause damage to your speakers.
By turning on your guitar amplifier LAST and making sure its Volume controls are set to minimum any transients from other equipment
will not reach your loudspeakers. Wait until all system parts have stabilised; usually a couple of seconds. Similarly when turning off your
system always turn down the Volume controls on your guitar amplifier and then turn off its power before turning off other equipment.
Cables: never use shielded or microphone cable for any speaker connections as this will not be substantial enough to handle the
amplifier load and could cause damage to your amplifier system.
Caution: These professional loudspeaker systems are capable of generating very high sound pressure levels. Use care with placement
and operation to avoid exposure to excessive levels that can cause permanent hearing damage. (Refer to guidelines on page 2)
Servicing: The user should not attempt to service these products. Refer all servicing to qualified service personnel.
OPERATING INSTRUCTIONS
Laney Laney
Power To The Music Power To The Music
RB115 RB115 RB115 RB115
LX412S
Model Model Model Model
Power Rating 300W Program Power Rating 300W Program Power Rating 300W Program Power Rating 300W Program
Serial Number: Serial Number: Serial Number: Serial Number:
SAMPLE
Input Input Link Link
D D UK UK L L
ESIGNED IN THE ESIGNED IN THE BY BY ANEY ANEY 8 Ohms 8 Ohms
www.laney.co.uk www.laney.co.uk
Page 10 /12