Advertisement
Note. If the Radio thermostat clock is going to replace the existing room thermostat
this must be linked out on the room thermostat terminal block.
Step 1 Remove clock from control panel.
Step 2 Swap wiring as shown. Make sure Live is connected to terminal 1 (wire
colour is not conclusive of polarity)
Step 3 Fit receiver into control panel.
Step 1 Remove clock from control panel.
Step 2 Swap wiring as shown. Make sure Live is connected to
Step 3 Fit receiver into control panel.
Note. If the Radio thermostat clock is going to replace the existing room thermostat
this must be linked out on the room thermostat terminal block.
6
Domina, Modena and Falcon
Domicompact Range
terminal 1 (wire colour is not conclusive of polarity)
Universal
Digital
Clock
5 3
2
1
4 3
2
1
Radio
Thermostat
Clock Receiver
Universal
Digital
Clock
5 3
2
1
4 3
2
1
Radio
Thermostat
Clock Receiver
Advertisement
