Connecting The Mains Adapter To The Port Replicator; Switching On The Notebook Via The Port Replicator - Fujitsu LIFEBOOK P8110 Operating Manual

Connecting the mains adapter to the Port Replicator

1
2
When the notebook is connected to a Port Replicator, the operating system creates
a hardware profile for the "Docked" mode. In this profile, for example, the setting is
saved as to which monitor was last used for output. This profile will be loaded, as
soon as the notebook is connected to a Port Replicator of the same type.

Switching on the notebook via the port replicator

► Press the ON/OFF switch on the port replicator to switch the notebook on.
The power-on indicator of the Port Replicator lights up.
A26391-K218-Z200-1-7619, edition 1
► Connect the mains adapter cable to the DC
jack (DC IN) of the Port Replicator (1).
► Connect the power cable to the
mains adapter (2).
► Plug the power cable into the mains
socket (3).
3
Working with the notebook
35