Download Print this page
CARVIN BRX1018 Instruction Manual
CARVIN BRX1018 Instruction Manual

CARVIN BRX1018 Instruction Manual

Brx bass system

Advertisement

Quick Links

CARVIN ENGINEERING DATA
BASS CABINETS
76-27900B 051304
Congratulations on your selection of the BRX bass system.
Carvin's BRX series delivers tight bottom end, crisp articulation, and
accurate tonal reproduction. The BRX10 and BRX12 feature state-
of-the-art Neodymium low frequency drivers with tight, smooth high
frequency Titanium compression drivers. Both of these models, as
stand alone cabinets, reproduce the full bass guitar range from the
deep tones of a low B string to the snap of a G string slap. The
BRX18, featuring one cast 18" large magnet 4" voice coil woofer,
offers the finest in extended high power low frequency reproduction.
BRX10
The BRX series cabinets incorporate 13-ply Baltic Birch plywood
construction for high efficiency and road worthiness. Every BRX
cabinet is equipped with large caster plates to accept the optional
CT535 (set of 4) 3 1/2" casters.
RECEIVING INSPECTION
INSPECT YOUR SPEAKER FOR ANY DAMAGE which may have occurred during
shipping. If any damage is found, please notify the shipping company & CARVIN.
SAVE THE CARTON & ALL PACKING MATERIALS. In the event you have to re-ship
your unit, always use the original carton and packing material. CARVIN and the
shipping company are not liable for any damage caused by improper packing.
SAVE YOUR INVOICE. It will be required for warranty service if needed in the future.
SHIPMENT SHORTAGE. If you find items missing, they may have been
shipped separately. Please allow several days for the rest of your order to
arrive before inquiring.
RECORD THE SERIAL NUMBER on the enclosed warranty card. Return the
warranty card with your name and comments to us.
BRX12
USA customers register online at: www.carvin.com/registration
All other countries register online at: www.carvinworld.com/registration
BRX Cabinets
BRX10
• Four Neodymium 300w 10" woofers, One horn tweeter
• Imp: 8Ω, power handling: 1200 Watts
• Freq. Resp: 26Hz - 22kHz
• Size: 24W x 20D x 26.75"H, WT 99 lbs
BRX12
• Two Neodymium 300w 12" woofers, One horn tweeter
• Imp: 8Ω, power handling: 600 Watts
• Freq. Resp: 30Hz - 22kHz
• Size: 24W x 20D x 26.75"H, WT 83 lbs
BRX18
• One heavy-duty 18" cast frame woofer
BRX18
• Imp: 8Ω, power handling: 800 Watts
• Freq. Resp: 24Hz - 2kHz
• Size: 24W x 20W x 26.75"H, WT 95 lbs
LIMITED WARRANTY Parts and labor are covered for 1 year on
manufacturer's defects. Warranty does not cover burned out drivers caused by
excessive power or distortion, or physical damage caused by general use,
moisture or dust.
destroy drivers much faster than clean RMS power.
SERVICE
authorization number). Write this number on the box and enclose a
description of the problem. Prepay to 12340 World Trade Drive, SD, CA
92128
Outside the USA, contact your dealer or go to http://www.carvinworld.com for
your nearest service center. Include a written description of the problem with
serial number and date of purchase.
BRX BASS SYSTEMS
CAUTION: Square wave distortion from power amps can
In the USA, please call 800-235-2235 for a RMA # (return
c

Advertisement

loading

Summary of Contents for CARVIN BRX1018

  • Page 1 RECEIVING INSPECTION INSPECT YOUR SPEAKER FOR ANY DAMAGE which may have occurred during shipping. If any damage is found, please notify the shipping company & CARVIN. SAVE THE CARTON & ALL PACKING MATERIALS. In the event you have to re-ship your unit, always use the original carton and packing material.
  • Page 2 -24dB, and finally OFF turns the high frequency driver off. Switching CW the attenuation halves to -3dB and then 0dB which turns the high frequency driver full on. Carvin suggests the B-series and R-series bass heads to power the BRX cabinents. B500...

This manual is also suitable for:

Brx1218Brx510Brx512Brx10Brx12Brx18