Connecting The Multi-Cd Changer To Your Wave Music System - Bose Wave Owner's Manual

Connecting the Multi-CD
Changer to your Wave
music system
Before you start this setup procedure, disconnect
the AC power cord on your Wave
and set it aside. You will need to use it again in
Step 3.
1. Plug the Bose ®
link cable from the changer into the
®
Bose link connector on your Wave
2. Plug the changer power cord into the AC power input
connector on the back of the Wave
AC
POWER
input
4
®
Wave music system
AC power cord
Changer
power
cord
®
® music system
®
music system.
® music system.
2
3
AC POWER input
For best FM reception,
straighten the power
cord as much as
possible.
5
3. Plug the AC power cord from the Wave
system into the AC power input connector on
the back of the changer.
4. Plug the other end of the AC power cord into an AC
(mains) wall outlet.
After applying power, "PLEASE WAIT" appears
on the display for about 30 seconds while the
system prepares itself for operation. DO NOT
insert any discs until this message disappears.
5. For best FM reception, straighten the AC power cord
as much as possible. Your Wave
the power cord as an FM antenna.
1
Bose
®
Bose link cable
S
®
music
® music system uses
Wave ® music
system
Multi-CD
Changer
® link connector
English – 7
ETUP