Basic Connection - Audio Pro LIVING LV1 Owner's Manual

BasiC COnneCtiOn

Mac setUp
1. Connect tX100 transmitter to a free usB socket.
2. go to system preferences, choose sound under hardware.
3. Click Output in menu, choose "usB headset".
done! you can now send audio from your computer.
pc setUp
Please do following setup before using music playing software (for example iTunes or Spotify).
1. Connect tX100 transmitter to a free usB socket. wait until software has been installed.
(see lower right hand corner, message window will open when sound device is ready to use.)
done! you can now send audio from your computer.
For some PC computers ( i e Windows 7) you may need to perform these settings:
2. Click start button, go to Control panel and choose sound & sound devices.
3. under playback of audio, default unit, choose "usB headset".
done! you can now send audio from your computer.
COnneCt By CaBle
Before connecting to computer, see Mac or PC setup.
1. Connect the tX100 transmitter to the computer.
2. Connect lv1 speaker to 230v outlet.
done! play your music on your computer.
wireless status:
led lights up blue on speaker and transmitter when
wireless connection is established.
led flashes blue on speaker when no wireless connection
is established.
note:
make sure that speaker and transmitter are using same house
Code (channel 1, 2 or 3).
if speakers are in standby mode, led is red even though wireless
connection is established.
led turns blue when speakers receives signal.
On rear panel of lv1 is a 3.5mm line input. Connect devices
directly with cable. Connect ipod/iphone/ipad dock, compu-
ter, cellphone, etc.
note: Connecting a device to line in will override wireless
connection. disconnect cable to play wirelessly again.