Explanation Front Panel; Explanation Rear Panel - DREAM MULTIMEDIA Dreambox DM 100 User Manual

U s e r M a n u a l D r e a m b o x D M 1 0 0

1.3.1 Explanation Front Panel

Smartcard Reader
Insert your Dreamcrypt Smartcard with the golden chip facing down and forward into the
Smartcard reader. Dreamcrypt is a registered trademark of Dream-Multimedia.
Standby LED
The Standby LED lights up red if the Dreambox is in standby mode. It lights up green if the
Dreambox is powered on.
Remote Control (RC) Led
The remote control LED lights up every time the Dreambox receives a signal from the remote
control.
Standby on/off
The Standby on/off button toggles between standby mode and powered on mode.

1.3.2 Explanation rear panel

LNB input
Connect the coaxial cable from your LNB here.
LNB output
You can connect an analogue/digital receiver here. Remember to shutdown your Dreambox
completely in order for the receiver to work.
S-Video output
Connect your S-Video cable to get better video quality.
TV Scart
Connect your TV or beamer to your Dreambox using a Scart cable.
Audio output - digital (Toslink)
You can connect your Dreambox with an optical (Toslink) cable to your HiFi-Amplifier or
DSP. The AC3 signal is also available at this port in case the selected channel transmits
Digital signals.
9
english