Volume - Cambridge SoundWorks Newton P1000 User Manual

FINAL SETUP
interface cable.
Power Connections
First, insert the AC plug of the Control Module's power
Pow ere d
Su bw oof PO WE R
er
supply adapter into an AC outlet. Then insert the
120 VA C
7.0 A
000 000 00
INT ER FAC
E JAC KS
adapter's output plug into the Control Module's
12V AC input jack. Turn the Control Module's power
switch to AUTO.
Insert the subwoofer enclosure's power cable into the
receptacle on the subwoofer enclosure's input panel.
Then insert the AC plug into an AC outlet. Turn the
subwoofer enclosure's power switch ON.
Remote Control
The remote control adjusts the VOLUME setting, an
adjustment best made from your listening position.
The battery inside the remote should last for a year or
two. When you need to replace it, use a small pointed
object (paper clip, pen, toothpick) to release the bat-
tery holder (see diagram). The battery type is CR2032
(3V) and is available wherever wrist watch and hearing
aid batteries are sold.
Test Your Connections
VOLUME UP
Once all connections have been made, test your
sound system to verify the subwoofer produces bass
VOLUME DOWN
output. Advance the Bass Level control to the
10 o'clock position. Turn on your receiver and play a
CD or movie you know to have significant bass. Listen
for subwoofer output as you increase your receiver's
SUBWOOFER VOLUME
volume control up to a moderate volume level. If you
don't hear any output from the subwoofer, slowly
advance the subwoofer's Bass Level (preferably via
the remote control). If you don't get any output,
12 12 12