EFFECTUE QUE PAR DU PERSON- NEL D’ENTRETIEN QUALIFIE. IMPORTANT NOTICE: THE SERIAL NUMBER FOR THE SUBWOOFER IS LOCATED ON THE SUBWOOFER’S CONTROL PANEL. PLEASE WRITE THIS NUMBER DOWN AND KEEP IT IN A SECURE AREA. THIS IS FOR YOUR SECURITY.
Use a damp cloth for cleaning. ATTACHMENTS – Do not use any adapters or attachments not recommended by Cambridge SoundWorks as they may cause hazards. WATER AND MOISTURE – Do not use the subwoofer or control module near water-for example, near a bath tub, wash bowl, kitchen sink, or laundry tub;...
Thanks for choosing a Newton HD Series speaker. The P300 HD features the finest drivers, precision internal crossover circuitry, and an elegant enclosure design. The design team at Cambridge SoundWorks believes there is no better combination of audiophile-level attention to detail and reasonable cost.
Do not tighten it. Then, screw a foot onto each of the spikes. Once the subwoofer is in its final position, adjust each foot so that the unit is level and stable. Tighten each locknut against the top of its corresponding foot to hold everything in place.
Page 6
Try placing the subwoofer in a vari- ety of locations while listening from multiple seating posi- tions.
Page 7
ALTERNATE CONNECTION The RJ11 input jack provides compatibility with the Cambridge SoundWorks Newton Series P500 and P1000 control consoles. You may connect a P300 HD to a system containing the control console either as a replacement for, or in addition to the original P500 or P1000 subwoofer enclosure.
Page 8
If is is not the case, your subwoofer may be too loud, or the crossover fre-...
SPECIFICATIONS Enclosure Cleaning The speaker enclosures can be cleaned with a soft cloth. Brush or vacuum the grille panels with a soft brush attach- ment to your vacuum cleaner. Specifications Dimensions: 27” H x 17-1/2" W x 8-1/8" D Weight: 70 pounds Amplifier power: 300W RMS Class-D with high efficiency switch-mode power supply.