Graco 311772H Repair Manual page 8

Reassembly
1. Angle left shroud half (5) into base and push down
into place. Then replace right shroud half (7).
5
2. Replace and tighten second screw (30).
30
3. Swing access door down (RTX 1250) and tighten
knob (42).
42
4. Tighten screw (70) into lower right corner of side
access plate.
70
8
ti9015a
ti9283a
ti8938a
ti8874a
5. Replace toolbox (2) and tighten screws (30) and
screw (31).
30
6. Tighten screws (31) on shroud.
31
7. Spread handle bars apart and slide handle down
into place.
8. Tighten 2 knobs (14) on sprayer handle (12).
9. Replace hopper and tighten hopper fitting by hand
until snug.
Shroud Removal
31
2
ti8884a
ti8882a
12
14
ti8875a
311772G