-
Maintenance
Maintenance
(Keep your Vax as good as new)
(Keep your Vax as good as new)
Removing the debris from the Turbo Brush
(VCZP1600/VCZR1600 Models only)
The brush bar will stop rotating if it is blocked during operation by
vacuuming up foreign objects, or if strands of hair or carpet are
wrapped around it.
Switch the vacuum cleaner off and disconnect the power plug
from the electrical outlet.
Lay the Turbo Brush floor head on a flat surface and turn over to
expose the brushbar. Using a pair of scissors, cut through any
threads or hairs caught by the brushbar that have wrapped
around the guides.
Vax Service line
6
Vax Careline
8
0870 606 1248
AU: 1300 361 505 / NZ: 0800 800 900