Page 2
Speaker Installation ......................4 During the warranty period, Aperion Audio will, at its option, either repair the defect, or replace the defective product, or the defective parts, or components thereof with the then current product/component in use by Aperion Audio, at no charge to the owner for parts and labor covered by Setting Up Your Receiver ....................19...
Once you listen to them in your home, we trust you’ll be equally grateful you chose Aperion. Dimensions: 12” x 8.75” 9” 9” The 6-IW, 6-IC and 6-DT are all members of the award-winning Intimus family. The 6-IW and 6-IC were Hole Cut Out: 11” - 11.5” x 7”- 7.5” 8.25-8.75” 8.25-8.75”...
Step 3, “Plan Your Wire Run” (Pg. 10)) insulation without paper backing • Insulated staples • Wire strippers • Level • Tape measure • Stud fi nder ($10 from Radio Shack or Home Depot) • Pencil Aperion Audio In-Wall and In-Ceiling Speakers (6-IC, 6-IW & 6-DT)
Page 5
If you need to remove grills after installation, the best method is to insert the supplied IN-WALL SPEAKER tool through a grill-hole near the edge and simply pull the grill out. INTIMUS 6-DT STEREO IN-CEILING SPEAKER Aperion Audio In-Wall and In-Ceiling Speakers (6-IC, 6-IW & 6-DT)
Page 6
“+3dB” Sometimes, real-world circumstances won’t allow for this ideal in-wall placement. 6-IW speakers work almost as position. If the speaker is aimed directly at you, well mounted horizontally. 6-IC speakers, with their aimable tweeter, will work fi ne in nearly all ceiling locations. If you’re very close to the speakers or the room is very...
fl ange to become snug against the wall. (Over- tightening may warp the baffl e, crack the wall, cause the fl ange to distort, and make the grill diffi cult to install.) Aperion Audio In-Wall and In-Ceiling Speakers (6-IC, 6-IW & 6-DT)
Page 8
Mounting feet installation, insert the supplied tool through and subtle surround sound, such as a dipole speaker provides, then locate either the 6-IW or 6-IC speakers well above a grill-hole near the edge and simply pull the ear-level. You can attain a more direct sound, like what monopole or bipole speakers produce, when placing 6-IW grill out.
Page 9
Step 5. Paint the Speaker Frame & Grill The 6-IW, 6-DT and 6-IC speakers are well suited for delivering quality sound throughout your house and even outdoors. They adapt well to almost any placement, and their aimable tweeter allows their sound to be directed If you want to paint your speakers (to match the wall or ceiling), we recommend that you do so before they are installed.
Page 10
Contact an Aperion Guru if you’d like more information about this at 888.880.8992 or by emailing us at customerservice@aperionaudio.com. Fig. A Aperion Audio In-Wall and In-Ceiling Speakers (6-IC, 6-IW & 6-DT)
Page 11
The speakers’ frames will overlap and hide the rough edges, so don’t building codes (it will be marked CL2 or CL3). Aperion Audio In-Wall & In-Ceiling Speaker Wire is perfect for this obsess about making absolutely perfect cuts.
Page 12
This involves routing out a shallow groove directly in the wallboard, laying the speaker wire in the channel and refi lling it with drywall compound. Or, use a combination of the above techniques. Fig. B Fig. A Aperion Audio In-Wall and In-Ceiling Speakers (6-IC, 6-IW & 6-DT)