Related Manuals for Aperion Audio A5
Summary of Contents for Aperion Audio A5
- Page 1 A5 Immersive Height Module Owners Manual An electronic copy of this manual can be downloaded from www.aperionaudio.com. © 2019 Aperion Audio. All Rights Reserved. Version 190515...
- Page 3 You're moments away from experiencing your new Novus speakers. We're honored that you chose Aperion Audio to bring your music and movies to life! Feel free to contact us if we can answer any questions or provide you with setup advice. Above alI, enjoy!
- Page 4 - If using the Aperion A5 on top of your existing speakers, the driver is directed in way that the sound will bounce of the ceiling to the listening position, creating an illusion of a ceiling mounted speakers.
- Page 5 The A5’s are intended to be used for stereo, surround or as height channel on the front left and right speakers, on the wall or on the ceiling. With the A5 used as a surround speaker, the tweeter should be placed at ear height and the speakers directed towards the listening position, as the figures below shows.
- Page 6 0° 22° 22° 30° 30° 135° 135° 150° 150° 5 Speakers 1 Subwoofer 0° 22° 22° 30° 30° 90° 90° 110° 110° 135° 135° 150° 150° 7 Speakers 1 Subwoofer...
- Page 7 - on the speaker. If you mix them you will introduce a polarity change resulting in Connecting degraded sound quality. The A5 has three sets of threaded inserts to attach the mounting bracket of your choice, all with with a distance of 60 mm (2.36”). This spacing is widely compatible with most mounting Mounting brackets.
- Page 8 Receiver/Processor same crossover point for all these channels) With Automated - Crossover frequency should be selected. We recommend 80Hz for the A5. Slightly Setup &Calibration higher or lower crossover point may yield better results in your system. Function - Note: some receivers do not have an adjustable frequency, instead there is only a ice of “small”...
- Page 9 the volume using the subwoofer’s “BASS LEVEL” control to maintain proper balance. - Polarity/phase; This should be adjusted for smoothest frequency response near the crossover point. - EQ settings; if your receiver/processor allows you to see the eq settings for each channel, verify that it is not adding any extra “limiter”, or “HPF”...
- Page 10 Care of your speaker Your new speakers do not require any regular maintenance or calibration. Normal dusting or cleaning of the surface for appearance purposes is all that is required. Avoid using harsh detergents or chemicals when cleaning the cabinet. Abrasives, detergents, or cleaning solutions may damage the finish on the cabinet.
- Page 11 Construction type 2-way, coaxial drivers Sealed Enclosure Frequency range 120Hz - 40kHz Crossover point 3 kHz Sensitivity 87 dB Impedance 6 ohm Power handling 20-100W RMS Terminals 5-way Gold-plated binding posts Color Stealth Black and Pure White Warranty 5 years 5.1＂x 7.1＂...
- Page 12 Service & support We allow a “do-it-yourself” approach on all Aperion products. If you are able to find out what part of the loudspeaker is defective, you are fully allowed to unmount that part (which would normally be a driver, a filter or the amplifier) and send it back to us for exchange. “Do It Yourself”...
- Page 13 Aperion Audio, at no charge to the owner for parts and labor covered by this warranty. If necessary repairs are not covered by this warranty, or if a unit is examined which is not in need of repair, you will be charged for the repairs and/or the examination.
- Page 16 An electronic copy of this manual can be downloaded from www.aperionaudio.com. © 2019 Aperion Audio. All Rights Reserved. Version 190515...
Need help?
Do you have a question about the A5 and is the answer not in the manual?
Questions and answers