Head Restraints - Toyota Corolla 2000 Operating Manual

Before returning the seatback to the
upright position, make sure to correctly
connect the center seat belt for ready
use.
Insert tab 1 (light gray) into the buckle
with light gray buckle- release button.
You will hear a click when the tab locks
into the buckle.
28
2000 Corolla(U)
CAUTION
D
Be careful not to mix up the proper
match of tab and buckle. Do not
insert tab 1 (light gray) into other
buckle than the one with light gray
buckle release button. (See "Seat
belts" in this section for proper
matching of the buckles and tabs.)
D
After inserting the tab, make sure
the tab and buckle are locked.
D
Do not insert coins, clips, etc. in
the buckle as this may prevent you
from properly latching the tab and
buckle.
D
Make sure the belt is not twisted or
caught in the seatback and that it
is arranged in the proper position
for ready use.
D
If the seat belt does not function
normally, immediately contact your
Toyota dealer.

Head restraints

For your safety and comfort, adjust the
head restraint before driving.
To raise: Pull it up.
To lower: Push it down while pressing the
lock release button.
The head restraint is most effective when
it is close to your head. Therefore, using
a cushion on the seatback is not recom-
mended.