Tilt Steering Wheel - Toyota Corolla 2002 Operating Manual

CHILD RESTRAINT SYSTEM
INSTALLATION
1. Widen the clearance between
seat cushion and seatback a little
and confirm the position of the low-
er anchorages below the tag in the
seatback.
2. Type A: Latch the hooks of lower
straps onto the anchorages
tighten the lower straps.
Type B: Latch the buckles onto the
anchorages.
If your child restraint system has a top
strap, it should be anchored. (For the
installation of the top strap, see "—Using
a top strap" in this section.)
For the installation details, refer to the
instruction manual equipped with each
product.
70
'02 Corolla U (L/O 0105)
CAUTION
the
D
When using the lower anchorages
for the child restraint system, be
sure that there are no irregular ob-
jects around the anchorages or that
the seat belt is not caught.
D
Push and pull the child restraint
and
system in different directions to be
sure it is secure. Follow all the
installation instructions provided by
its manufacturer.
D
Do not put a child restraint system
on the rear seat if it interferes with
the lock mechanism of the front
seats. This can cause severe injury
to the child and front passenger in
case of sudden braking or a colli-
sion.
2002 Corolla_U (OM12743U)

Tilt steering wheel

To change the steering wheel angle,
hold the steering wheel, push down the
lock release lever, tilt the
wheel to the desired angle and return
the lever to its original position.
When the steering wheel is in a low posi-
tion, it will spring up as you release the
lock release lever.
steering