Removing Extension Table - White 1477 Instruction Manual

REMOVING EXTENSION TABLE
To convert the machine from flat-bed
to free-arm use simply remove
the
tension -table as shown.
THIS IS ONLY APPLICABLE TO MACHINES MANUFACTURED FOR THE UNITED KINGDOM
IMPORTANT
The wires in this mains lead are coloured in accordance with the following code:
BLUE
—
NEUTRAL
BROWN
—
LIVE
NOTE. As the colours of the mains lead of this appliance may
not
correspond with the coloured
markings identifying the terminals in your plug, proceeá as follows:
Connect BROWN wire to terminal marked L or coloured RED.
Connect BLUE wire to terminal marked N or coloured BLACK.
FIT CORRECT PLUG TO POWER CORD
WHEN USING A B.S. 1363 FUSEO PLUG, A 3 AMP. FUSE MUST BE FITTED.
If the terminals of the plug are unmarked consult a qualified electrician before use.
M'ien leaving the sewing machine unattended, the plug must be removed from the socket outlet
'Mien servicing the sewing machine, or when removing covers or changing lamps, the machine or
the electrical set must be disconnected from the supply by removing the
plug from the socket
outlet
THE MAXIMUM INPUT OF LAMP: 240 V 15W.
THIS APPLIANCE CONFORMS TO THE STATUTORY RADIO INTERFERENCE
SUPPRESSION REGULATIONS.
—3-—