Inserting Bobbin Case Into Shuttle Race; Changing Needle - White 1477 Instruction Manual

1. Ensure needle is at its highest position.
Pulling thread to the front, open the
latch of bobbin case and hold it.
2. Holding latch open, place bobbin case
onto centre pin in shuttle and release
latch.
1. Raise needle to its highest position.
2. Loosen needle clamp screw and re
move old needle.
3. With the flat side of the needle facing
away from you, insert needle as far up
as
it
will go.
4. Tighten
the needle clamp rew
securely.
Note:
At the first
sign of any stitching
irregularity always change the needle for
a new good quality one.
Insert
—8—