Changing The Is-Mode Settings; Registering Functions To The C Button - Canon IXUS 870 IS User Manual

Changing the IS-Mode Settings

•
If camera shake is too strong, fix the camera to a tripod. However, it is
recommended to set IS Mode to [Off] when the camera is fixed to a tripod.
•
When using [Panning], hold the camera horizontally. Image stabilization
does not work when the camera is held vertically.

Registering Functions to the c Button

•
Press
•
When this
function cannot be used in the current shooting mode or function setting.
, each press of the c button records white balance data
•
In
and the white balance settings also change to
, each time you press the c button, the shutter sound's
•
In
in the 5 tab will play. Use this when you want to draw the
(p. 141)
attention of the subject before shooting.
Select [IS Mode], then press the qr buttons to
●
select an option.
●
[Continuous]: The image stabilization is
always on. You can confirm the result directly
on the display, which makes it easier to check
the composition or focus of the subject.
●
[Shoot Only]: The image stabilization is only
on in the moment of shooting.
●
[Panning]: The image stabilization only works
for the effect of up and down motion. This
option is recommended for shooting objects
moving horizontally.
Select [Set c button], then press the m
●
button.
Press the opqr buttons or turn the  dial
●
to select the functions to register, then press
the m button.
Pressing the c button will call up the
●
registered function.
if you want to cancel a function.
symbol is shown on the bottom right of an icon, the
Changing Shooting Functions
.
(p. 71),
clip
139