Viewing Slideshows - Canon IXUS 870 IS User Manual

. Viewing Slideshows

You can automatically playback images and movies recorded to a memory
card. Each image displays for approximately 3 seconds.
If you press the qr buttons or turn the  dial during playback the
•
image will switch, if you press and hold down the qr buttons you can
fast-forward through images.
•
Power saving function does not work during slideshows
Changing Settings
You can change the time that images are displayed, and set the slide show
to repeat.
Select [Slide Show].
Press the n button and select the 1
●
tab, then select [Slide Show] and press
the m button.
Select [Start].
Press the qr buttons or turn the  dial
●
to select [Start], then press the m button.
A few seconds after [Loading image...]
displays, the slideshow will start.
●
You can pause/restart a slideshow by
pressing the m button again.
Press the n button to stop the
●
slideshow.
Select [Set up].
●
Follow Step 2 above, select [Set up] and
press the m button.
Make the setting.
Press the op buttons and select an item,
●
then press the qr buttons, or turn the Â
dial and make the setting.
Pressing the n button will return you
●
to the slide show screen.
(p. 51).
101