Remote Options; Selecting Options/Standard Settings - Bosch Dishwasher Instructions For Use Manual

en
Programme data
The programme data (duration, energy
and water consumption) can be found in
the summary of instructions and refers to
standard conditions. Greater deviations
may be caused by:
different quantities of utensils
inlet temperature of the water
water pressure
ambient temperature
mains voltage tolerances
and appliance-specific tolerances
(e.g. temperature, water flow rate, etc.)
Only ranges can be indicated for the
automatic programmes.
The water consumption values refer
to water hardness value 4.
22
Selecting options/
standard settings
Operating principle

Remote Options **

The dishwasher installs itself automatically
during the first use within a serve@Home
network. In some cases however, it might
become necessary to start the enrolment
process anew.
If the option "Remote Options" is
selected, the message "Enrol Device"
will be displayed. By pressing the
button + you enrol the device
3
again at the gateway. After successfully
enrolling the device the message
"Auto Wash" will be displayed.
If the enrolment is unsuccessful the
display shows "no gateway found".
**
Only with installed interface
From the Main Menu you can select the
following options/settings by repeatedly
pressing the button M/OK
Timer programming
Remote Control**
Reduce Time
Drying Level
Buzzer Volume
Adding Rinse Aid
Water Hardness
Language
Standard Programmes
Remote Setting**
** Only with installed interface
:
2