Bosch Washing Machine Instruction Manual And Installation Instructions page 46

Fault
Load is not displayed.
Programme continues
running even though the
appliance has been
switched off and on
again.
Appliance cannot be
operated. "$" is
indicated on the display
panel.
Control lights do not g
come on.
Display panel is blank.
Display panel is blank.
Programme does not
start. The "Start/Stop"
indicator light flashes.
Programme does not
start. "Delayed start" is
indicated on the display
panel.
Time cannot be set.
46
Possible cause
Washing was already in the drum
before the appliance was switched
on.
Childproof lock / appliance lock is
active.
Childproof lock / appliance lock is
active.
The mains fuse has tripped.
Power failure.
Energy saving mode active.
"Start/Stop" button not pressed.
End time selected and activated.
Programme has already started;
when the programme has started,
the time cannot be set.
Remedial action
Switch off the appliance, take the
washing out of the drum and switch
on the appliance again. Insert
washing again.
Press the "Start/Stop" button for
4 seconds.
Press the "Start/Stop" button for
4 seconds.
Switch on/replace the fuse.
pp
If the fault occurs repeatedly, call
Customer Service.
Programme continues running when
the power has been restored. If the
washing is to be removed during the
power failure, proceed as described
under "Emergency lock release",
see Page 40.
Press any button (except "On/off").
Press the "Start/Stop" button.
None. Appliance starts automatically.
Wait until programme ends.