Bosch Washing Machine Instruction Manual And Installation Instructions page 22

Detection and
control systems
Load sensor
When the door is open, the load sensor
indicates the amount of loaded laundry
as a %, depending on the selected pro
gramme. To ensure that the load sensor
measures all the laundry, the drum must
be empty before the washing machine is
switched on.
We recommend that you stop loading the
drum when the load sensor indicates
100%.
Dosing recommendation
The dosing recommendation indicates
a recommended detergent dosage as
a %, depending on the selected program
me and the detected load. The indicated
% refers to the recommendation of the
detergent manufacturer. Note degree of
soiling!
Aqua Sensor
The Aqua sensor checks the degree of
clarity of the rinsing water during the rinse
cycle. The duration and the number of rin
se cycles are determined by the clarity of
the water.
Therefore, water and time can be reduced
if lightly soiled laundry is washed with the
corresponding detergent dosage.
22
Load adjust
Load adjust adjusts the water and power
consumption to each programme - ac
cording to the amount of laundry and type
of textiles.
Therefore, if small amounts of washing are
washed, water and energy consumption
is reduced.
The flow sensor, like an internal water me
ter, measures the supplied water flow rate
and doses precisely as much water as is
required by the amount of laundry.
The stepless water level sensor ensures
the correct water level required to wash
your laundry in each programme.
Unbalanced load detection system
The automatic unbalanced load detection
system spins the laundry several times to
ensure even distribution.
If the laundry is very unevenly distributed,
the final speed is reduced or there is no
spin cycle for reasons of safety.