Troubleshooting - Bosch Cooker Hob Operating Instructions Manual

INHOUD
Veiligheidsvoorschriften
Zo ziet uw nieuwe kookplaat eruit
Gasbranders
Aanbevolen diameters pannen
Kooktips
Elektrische kookplaat
Met continue energieregelaar
Met schakelaar
Gebruiksvoorschriften
Wat betreft het Koken
Reiniging en onderhoud
Abnormale situaties
Garantievoorwaarden
16

Troubleshooting

17
19
20
21
What´s wrong
22
...if none of the electrical
22
system works?
23
24
25
...if the electric ignition system
25
does not work?
26
27
28
...if the flame on the burners is
not evenly distributed?
...if the gas flow does not seem
normal or there is no gas flow
at all?
...if the kitchen smells of gas?
...if the safety devices on the
different burners do not work?
It is not always necessary to call the Service Centre. In
some cases, you may be able to solve the problem
yourself. This table contains some useful information.
Important information:
Only authorised personnel from our Service Centre are
qualified to work on the main gas and electric systems.
Possible cause Solution
-Faulty fuse. -Check the fuse in the
main fuse box and
replace it if it is faulty.
-The automatic circuit breaker -Check to see if the circuit
or mains differential has been breaker or a differential has
triggered. been triggered in the mains
supply box.
-There may be food or cleaning -The gap between the spark
product particles between the plug and the burner needs to
spark plugs and the burners. be cleaned carefully.
-The burners are wet. -Dry the burner covers and
spark plugs carefully.
-The covers on the burners are -Check that the covers
not in the right position. have been put in the
proper position.
-The burner components have -Put the components in their
not been assembled properly. correct positions.
-The gas outlets on the burners -Clean the gas outlets on the
are dirty. burners.
-The gas flow has been cut at - Open any intermediate
an intermediate stopcock. stopcocks.
-If the gas is supplied from a -Replace the gas bottle with
gas bottle, it may be empty. a full one.
-One of the valves has been -Check to see if a valve has
left open. been left open.
-Possible leak on the gas bottle -Check that the coupling on
coupling. the gas bottle is in order.
-The control knob has not been -Once ignited, keep the
kept pressed in for long control knob pressed in for
enough. a few seconds.
-The outlets on the burners are -Clean the gas outlets on the
dirty. burners.
13