Saitek Combat Rudder Pedals User Manual page 7

6. At the Driver Setup screen, click Next to test your controller.
7. When the Saitek Controller screen appears, try out all of your controller's controls to
determine if it is working properly. When you have finished, click OK.
8. In the following Software Setup screen, click Next and follow the on-screen
instructions. At this point you will be asked to install such features as the
Programmable Support for Mouse, Programmable Support for Keyboard and
Programmable Hotkeys (these are important components of the programming
software and are required).
9. If you are asked if Windows can connect to Windows Update to search for software,
choose No, not at this time. Continue to click Next and Finish to accept the installation
until the Registration screen appears.
10. The next window will install the important components of the software. When asked
what to do, choose Install the software automatically (recommended). Do this for the
Keyboard, Mouse and Hotkeys.
11. At the Registration screen, select Check this box to register now and follow the
on-screen instructions, or do not select this option and register later.
12. Upon completion of the installation, you have the option to Run Profile Editor, which
will give you a view of the programming environment. If you do not wish to see the
Profile Editor at this point, uncheck the box and click Finish to complete the installation.
drIvErS aNd SoftwarE INStaLLatIoN for uSErS of wINdowS® vISta aNd 7, 32-
aNd 64-bIt
1. With your computer powered on, close down any programs that are currently running,
and then insert the Installation CD into your CD-ROM drive.
2. When the Introduction Screen appears, click Install Software to continue. If the CD
does not run automatically, select Start from the Windows Taskbar, then Run, then type
D:\Setup.exe into the Run window's text entry field, and then click OK (assuming D:\ is
the letter of your CD-ROM drive).
3. When the Welcome screen appears, click Next to continue.
4. After reading the Disclaimer, select the I accept the terms of the Disclaimer option
and click Next to continue.
7