Volume Control; Technical Specifications - BLUENOTE S1 Owner's Manual

DISC* is the Phono dedicated INPUT. The Board is installed but the functionability is optional. Once installed you can switch MM and MC
operating by moving the small DIP SWITCH with 4 Micro-Switches that is positioned internally closed to the external DISC input RCA
connectors.
The Micro-Switches 1 & 4 are able to vary the Gain of the unit: with the Micro-Switches towards the NUMBERS SIDE the De Medici operates
in MM mode; with Micro-Switches towards the ON SIDE the De Medici operates in MC mode.
The Micro-Switches 2 & 3 are able to vary the load impedance of the unit: with the Micro-Switches towards the NUMBERS SIDE the De
Medici operates with a fix 47Kohm (right for all MM cartridges); with Micro-Switches towards the ON SIDE the De Medici operates with a
470ohm (default) or changing the resistors (optional) with the unit with a specific load as requested by the user.
DO NOT OPEN THE UNIT WITHOUT A WRITTEN PERMISSION OF YOUR LOCAL DISTRIBUTOR MUST BE DELIVERED
DURING PURCHASING. IF THE WARRANTY CERTIFICATE IS NOT COMPLETE AND ALL STEPS ARE NOT FOLLOWED THE
WARRANTY WILL NOT COVER ANY EVETUAL DAMAGE OF THE UNIT FREE OF CHJARGE.
Panel features
S - 1
Italian Prestige Integrated Amplifier
The volume control of this unit is made with an high quality potentiometer made by ALPS. It is very precise and its error track ability is very
low. Besides it is made with such materials that render its durability far superior with many other potentiometers on the market. The remote
volume control with its proper electronic board and power transformer (to avoid any kind of interferences on signal path) works directly on a
DC motors positioned on the back of the potentiometer to avoid the use of electronic controllers can reduce sound quality.
B e careful during the remote use: the remote moves the volume very slowly when the triggers UP or DOWN are maintained
pushed.
The following data describe the basic technical specifications of the BLUENOTE® S - 1 integrated amplifier at the time of drafting this manual.
The specifications are subject to modification without notice. The product complies with the requirements laid down in the EC regulations.
DIMENSIONS:
WEIGHT:
FREQUENCY RESPONSE:

Volume Control

Technical Specifications

430mm L x 90mm H x 350mm D
20Hz - 20KHz @ +/- 3dB
Kg. 10,00 (22lbs.)
5